Filter
Top Products
Initializing the 01V96 243
01V96 Version 2—Owner’s Manual
Other Functions
19
Initializing the 01V96
You can delete all currently-recorded settings and restore the factory-preset values, and reset
the Operation Lock password to its initial setting. Follow the steps below.
1 Make sure that the power to the 01V96 is turned off.
2 While holding down the SCENE MEMORY [STORE] button, turn on the
POWER ON/OFF switch.
After a moment, the 01V96 displays the following confirmation window.
3To reset the 01V96 to factory default settings, move the cursor to the INI-
TIALIZE button, then press [ENTER].
To cancel the initialization operation, move the cursor to the CANCEL button, then press
[ENTER].
When the internal data is thoroughly overwritten, the 01V96 restarts using the factory set-
tings.
4To reset the Operation Lock password to its initial setting, in Step 2, move
the cursor to the PASSWORD button, then press [ENTER].
The password is reset to “1234”.
If you do not take any action after the confirmation window appears, the window automat-
ically closes and the 01V96 restarts without being initialized.
Note:
•If you initialize the 01V96 to the factory-preset values, all Scene, library and other data you
stored previously will be erased. Proceed with caution.
•If you want to keep the current internal data, be sure to first back up the data using the
included Studio Manager software.
Tip:
•You can also store the data to an external MIDI device, such as a MIDI data filer, by using
MIDI Bulk Dump (see page 226).