Filter
Top Products
70 Chapter 6—Analog I/O & Digital I/O
01V96 Version 2—Owner’s Manual
• GAIN controls
Inputs 1 through 16 feature rotary gain controls that adjust input
sensitivity. Input sensitivity for INPUT connectors 1–12 ranges from
–16 dB to –60 dB when the Pad is off, and from +4 dB to –40 dB
when the Pad is on. Input sensitivity for INPUT connectors 13–16
ranges from +4 dB to –26 dB.
• PEAK & SIGNAL Indicators
The SIGNAL indicator lights up when the input signal level at
INPUTs 1–16 exceeds –34 dB. The PEAK indicator lights up when
the input signal level is 3 dB below clipping.
• 2TR IN connectors
These unbalanced RCA phono connectors accept line-level signals
from master recorders.
When the AD 15/16 source selector is turned on (pushed in), signals
input at these conductors are routed to AD Inputs 15 and 16. When
the Monitor source selector is turned on (pushed in), you can mon-
itor these signals from the MONITOR OUT connectors.
Output Section
The 01V96 top and rear panels feature output connectors that enable you to connect a mon-
itoring system, master recorder, effects processors and other line-level devices.
• MONITOR OUT connectors L/R
These balanced TRS-type phone connectors output monitoring sig-
nals or input signals routed from the 2TR IN connectors. The nom-
inal output level is +4 dB.
Use the Monitor source selector in the AD Input section to select the
signal output from these connectors.
• OMNI OUT connectors 1–4
These balanced TRS-type phone connectors output any
Bus Outs or Input Channel Direct Outs. The nominal out-
put level is +4 dB.
• STEREO OUT connectors L/R
These balanced XLR-3-32-type connectors output the Stereo Out
signals. The nominal output level is +4 dB.
• 2TR OUT connectors
These unbalanced RCA phono connectors output line-level signals
to a connected master recorder or other external device. These
connectors always output the Stereo Out signals.
Tip: Any signal path can be patched to the OMNI OUT connectors. (See page 124 for more
information on patching signals to the OMNI OUT connectors.)
PEAK
SIGNAL
GAIN
-16
-60
PEAK
SIGNAL
GAIN
L
R
IN OUT
2TR
-10dBV (UNBAL)
L
R
IN OUT
2TR
-10dBV (UNBAL)