Filter
Top Products
132
MOTIF Reference
Voice Edit mode
Reference Voice mode
time
Sets the Time parameter range to reflect “time”:
0 (fast) - 127 (slow)
● [F1]-[SF5] Normal Common General Other
From this display you can set the control functions
for the Knobs, and determine the up/down range
for the Pitch Bend wheel.
• Knob Assign
Determines the function for the assignable Knobs (1-4).
Pressing the [KNOB CONTROL FUNCTION] button on
the panel sets the desired function row, which is
automatically stored to memory with the currently
selected voice.
❏ Settings
• ChoCtrl
Determines the depth of the Chorus effect, as controlled by
the Knob assigned to Chorus Send.
❏ Settings -64 ~ 63
• PBUpper, PBLower
These two parameters determine the pitch change range of
the Pitch Bend wheel.
❏ Settings -48 ~ 24
• Assign A, Assign B, Assign 1, Assign 2
This lets you directly set and memorize the value for each
Assign Knob (A, B, 1, and 2), from the Knob itself. Simply
tweak the knob to the desired setting.
● [F2] Normal Common Output
•Volume
Determines the output level of the Voice.
❏ Settings 0 ~ 127
•Pan
Determines the stereo pan position of the Voice. You can
also adjust this parameter using the PAN knob on the
front panel.
❏ Settings L63 (Left) ~ C (Center) ~ R63 (Right)
•RevSend
Determines the Send level of the signal sent from Insertion
Effect 1/2 (or the bypassed signal) to the Reverb effect.
You can also adjust this parameter using the REVERB
knob on the front panel.
❏ Settings 0 ~ 127
• ChoSend
Determines the Send level of the signal sent from Insertion
Effect 1/2 (or the bypassed signal) to the Chorus effect.
You can also adjust this parameter using the [CHORUS]
knob on the front panel of the MOTIF.
❏ Settings 0 ~ 127
● [F3]-[SF1] Normal Common Arpeggio
Arpeggio type
Basic Structure (page 55)
The basic parameters (e.g., type, tempo) of the
Arpeggio are provided in this display.
When user arpeggio is selected, you can clear the
selected arpeggio data by using the [SF5] button.
• Bank
Determines the Bank.
❏ Settings pre1, pre2, user
• Type
Determines the Arpeggio type. The two-letter prefix before
the name indicates the general Arpeggio category.
•Tempo
Determines the Arpeggio Tempo. When MIDI sync
(page 258) is turned on, “MIDI” is displayed here and
cannot be set.
❏ Settings 1 ~ 300
• Switch
Determines whether Arpeggio is on or off. You can also
turn Arpeggio on/off from the front panel with the
[ARPEGGIO ON/OFF] button.
❏ Settings off, on
KNOB
CONTROL
FUNCTION
PAN
REVERB
CHORUS
TEMPO
ATTACK RELEASECUTOFF
RESONANCE
ASSIGN A ASSIGN B ASSIGN 1 ASSIGN 2
KN 1 KN 2 KN 3 KN 4
MEQ LOW
MEQ HI MIDMEQLOWMID MEQ HIGH
Pan & Send
Tone
Assign
MeqGain
This apppears only when user arpeggio is
selected and cursor is located at Type.