Filter
Top Products
155
MOTIF Reference
Voice Edit mode
Reference Voice mode
● [F4]-[SF3] Plug-in Common Control Set
After Touch
The MOTIF gives you a comprehensive set of after
touch controls for the Plug-in voice, allowing you to
change the pitch and filter settings, and produce
modulation effects (pitch, filter and amplitude)-
simply by pressing down hard on the keys.
• Pitch
Determines the depth of control of keyboard aftertouch
over pitch. You can set a value (in semitones) of up to two
octaves.
❏ Settings -24 ~ 0 ~ +24
• Filter
Determines the depth of control of keyboard aftertouch
over the filter cutoff frequency.
❏ Settings -64 ~ 0 ~ +63
• PMod (Pitch Modulation Depth)
Determines the depth of control that keyboard aftertouch
has over pitch modulation. The higher the setting, the
greater the depth of control.
❏ Settings 0 ~ 127
• FMod (Filter Modulation Depth)
Determines the depth of control that keyboard aftertouch
has over filter cutoff modulation. The higher the setting,
the greater the depth of control.
❏ Settings 0 ~ 127
• AMod (Amplitude Modulation Depth)
Determines the depth of control that keyboard aftertouch
has over amplitude modulation. The higher the setting, the
greater the depth of control.
❏ Settings 0 ~ 127
● [F4]-[SF4] Plug-in Common Control Set
AC (Assignable Controls)
From this display you can assign MIDI Control
Change numbers and determine the degree to which
the assigned controllers affect the filter and the
modulation effects (pitch, filter and amplitude). For
details on using Control Change numbers and the
Assignable Controls, see page 191.
• Source
Determines the MIDI Control Change number used to
control the filter, PMod, FMod, and Amod.
❏ Settings 0 ~ 95
• Filter
Determines the depth of control the Control Change
numbers (set in the Source parameter above) have over the
filter cutoff frequency.
❏ Settings -64 ~ 0 ~ +63
• PMod (Pitch Modulation Depth)
Determines the depth of control the Control Change
messages (set in the Source parameter above) have over
pitch modulation. The larger the setting, the greater the
depth of control.
❏ Settings 0 ~ 127
• FMod (Filter Modulation Depth)
Determines the depth of control the Control Change
messages (set in the Source parameter above) have over
filter cutoff modulation. The larger the setting, the greater
the depth of control.
❏ Settings 0 ~ 127
• AMod (Amplitude Modulation Depth)
Determines the depth of control the Control Change
messages (set in the Source parameter above) have over
amplitude modulation. The larger the setting, the greater
the depth of control.
❏ Settings 0 ~ 127
● [F6]-[SF1] Plug-in Common Effect
Connection
Basic Structure (page 40)
This is the same as in Normal Voice Common
Edit (page 137), with the exception of the following
points.
• EL: OUT settings are not available in Plug-in
Voice Common Edit.
• The parallel setting (Insertion Connection) is
not available in Plug-in Voice Common Edit.
● [F6]-[SF2], [SF3], [SF4], [SF5] Plug-in Common
Effect Parameter Insertion 1, 2, Reverb,
Chorus
The number of parameters and values available
differs depending on the currently selected effect
type. For more information, see the Effect Type List
in the separate Data List booklet.