Filter
Top Products
271
MOTIF Reference
Master Edit mode
Reference Master mode
◆ Basic Procedure
1 Press the [MASTER] button to enter the Master
Play mode. (The indicator lights.)
2 Select a Master to be edited.
3 Press the [EDIT] button to enter the Master Edit
mode. (The indicator lights.)
• When the Mode parameter in the Master Play
Memory display is set to Song or Pattern, go to
step #5.
• When the Mode parameter in the Master Play
Memory display is set to Voice or Performance,
go to step #4.
4 Select a zone to be edited.
• To edit parameters common to all of the zones,
press the [DRUM KITS] button (which serves as
a “COMMON” button here).
• To edit parameters of the individual zones, select
the desired zone with the corresponding
NUMBER button, [1] - [4].
5 Select the menu you wish to edit by pressing the
[F1] - [F6] buttons.
6 Edit the parameters for the selected Master.
7 Store the settings edited in step #6 to the User
Memory as required.
8 Press the [EXIT] button to exit from the Master
Edit mode.
• For details on step #2, refer to “Master Play
mode” on page 269.
• For detailed instructions on steps #5 - #6, see the
explanations below.
• For details on step #7, refer to “Master Store
mode” on page 274.
■ Common edit
● [F1] Common Name
From this display you can create a name for the
Master. For detailed instructions on naming, see
“Basic Operation” on page 75.
● [F2] Common Other
From this display you can set which row of Knob/
Slider functions will be lit and selected.
❏ Settings pan, tone, assign, MEQofs, zone
n The setting “zone” above is available only when
the Zone Switch is set to on in the [F2] MEMORY
display in the Master Play mode.
■ Zone Edit (Voice/Performance mode only)
n Use the following Zone Edit functions to create your own
sophisticated four-way splits and layers.
● [F1] Zone Transmit
Basic Structure (page 57)
From this display you can set how each zone
transmits MIDI data when you play the keyboard.
DRUM KITS
FAVORITES
COMMON
1
2
3
4
ELEMENT/PERF.PART/ZONE
When set to pan, calling
up the Master lights and
selects this row.
When set to MEQofs,
calling up the Master lights
and selects this row.
When set to tone, calling
up the Master lights and
selects this row.
When set to assign, calling
up the Master lights and
selects this row.
When set to zone,
calling up the Master
automatically calls up
the Knob/Slider
functions specifically set
for each respective zone
(page 57).
KNOB
CONTROL
FUNCTION
PAN
REVERB
CHORUS
TEMPO
ATTACK RELEASECUTOFF
RESONANCE
ASSIGN A ASSIGN B ASSIGN 1 ASSIGN 2
MEQ LOW
MEQ HI MIDMEQLOW MID MEQ HIGH
MASTER
VOLUME
VOLUME 1 VOLUME 2 VOLUME 3 VOLUME 4
CS 1 CS 2 CS 3 CS 4
ZONE 1 ZONE 2 ZONE 3 ZONE 4
KN 1 KN 2 KN 3 KN 4