Filter
Top Products
167
MOTIF Reference
Performance Edit mode
Reference Performance mode
❏ Settings -64 ~ +63
● [F1]-[SF4] Common General Portamento
From this display you can set the Portamento
parameters for all parts of the selected performance.
Portamento is used to create a smooth transition in
pitch from the first note played on the keyboard to
the next.
• Switch
Determines whether Portamento is on or off for the entire
performance. Keep in mind that this is a global control;
you can also switch Portamento on and off for individual
parts in Part Switch below.
❏ Settings off, on
• Time
Determines the pitch transition time.
This parameter offsets the same parameter in the part edit
settings (page 170). Higher values result in longer
transition times.
❏ Settings -64 ~ +63
• PartSwitch
Determines whether Portamento is on or off for each
individual part.
● [F1]-[SF5] Common General Other
From this display you can set the control functions
for the Knobs and related parameters.
With the exception of Pitch Bend, which cannot be
set here, these parameters are the same as in the
Voice Edit mode (page 132).
● [F2]-[SF1] Common Output
• Volume
Determines the output level of the selected performance.
You can adjust the overall volume, keeping the balance
between all parts .
❏ Settings 0 ~ 127
• Pan
Determines the stereo pan position of the selected
performance.
This parameter offsets the same parameter in the part edit
setting (page 163).
You can also adjust this parameter using the PAN knob on
the front panel.
❏ Settings L63 (Left) ~ C (Center) ~ R63 (Right)
n A setting of “C” (center) maintains the individual
Pan settings of each Part.
• RevSend
Determines the Send level of the signal sent from Insertion
Effect 1/2 (or the bypassed signal) to the Reverb effect.
You can also adjust this parameter using the REVERB
knob on the front panel.
❏ Settings 0 ~ 127
• ChoSend
Determines the Send level of the signal sent from Insertion
Effect 1/2 (or the bypassed signal) to the Chorus effect.
You can also adjust this parameter using the [CHORUS]
knob on the front panel.
❏ Settings 0 ~127
KNOB
CONTROL
FUNCTION
PAN
REVERB
CHORUS
TEMPO
ATTACK RELEASECUTOFF
RESONANCE
ASSIGN A ASSIGN B ASSIGN 1 ASSIGN 2
MEQ LOW
MEQ HI MIDMEQLOWMID MEQ HIGH
KN 1 KN 2 KN 3 KN 4