Filter
Top Products
193
MOTIF Reference
Song Job mode
Reference Song mode
Song Job mode
The Song Job mode contains a comprehensive set of
editing tools and functions you can use to change the
sound of the song. It also includes a variety of
convenient operations, such as copying or erasing data.
Most of these operations can be performed on either an
entire track or a selected range of measures in the
track.
◆ Basic Procedure
1 In the Song Play mode, select a song you wish to
execute the Job on.
2 Press the [JOB] button to enter Song Job Mode.
3 Select the desired Job menu by pressing the
appropriate button, [F2] - [F6].
4 Use the CURSOR buttons to scroll to the desired
Job.
5 Press the [ENTER] button to go to the selected Job
display.
6 Set the relevant Job parameters.
7 Press the [ENTER] button. (The display prompts
you for confirmation.)
8 Press the [INC/YES] button to execute the Job.
After the Job has been completed, a “Completed”
message appears and operation returns to the
original display.
n To cancel the Job, press the [DEC/NO] button.
9 If you wish to undo the changes made in the steps
above, press the [F1] button and (to select Undo/
Redo) and use the Undo function.
10 Press the [SONG] button to exit from Song Job
mode and return to Song Play mode.
• For detailed instructions on steps #3 - #9
, see the
explanations below.
[F1] Undo/Redo
The explanations here apply to step #9 of the Basic
Procedure (see above).
The Undo Job cancels the changes you made in your
most recent patch session, recording session, editing
session, or Job, restoring the data to its previous state.
This allows you to recover from accidental data loss.
Redo is available only after using Undo, and lets you
restore the changes you made before undoing them.
Undo/Redo does not work with sample voice operations.
[F2] Note data Job
Press the [F2] button in steps #3 of the Basic Procedure
(see above). so that the Note data Job list appears on
the display. Scroll the cursor to the desired Job and
press the [ENTER] button to go to the display of the
selected Job.
The following explanations apply to step #6
of the
Basic Procedure (see above).
n Before executing the Note data Job, make sure that you
specify the track (01~16, all) and range (measure : beat :
clock) to which the Job is applied.
Indicates the current Job: Undo or Redo.
Indicates the operation to be
affected by Undo or Redo.
Press the [ENTER] button to
execute the Undo/Redo
operation.