Filter
Top Products
191
MOTIF Reference
Song Edit mode
Reference Song mode
■ Program Change
These events determine the selected voice for the note
data. Keep in mind that Program Change events can be
inserted at any point in a song track, letting you change
voices in the middle of a song.
• Bank Select MSB, LSB
Determines the voice bank.
❏ Settings ***~127
n Bank select MSB and LSB are actually part of the
Control Change set of messages (below).
However, since they apply specifically to voice
selection, they grouped and described here.
• Program number
Determines the specific voice (from the bank selected by
MSB and LSB above).
❏ Settings 001~128
n For a complete list of the available voice banks and
numbers, refer to the Voice List in the separate
Data List booklet.
■ Control Change
These events control the sound and certain response
characteristics of the voice, and are usually generated/
recorded by moving a controller (such as a modulation
wheel, knob, slider or foot controller).
• Control number
Determines the Control Change number. (See chart
below.)
❏ Settings 000~127
n For details on using Control Change numbers
(including those above), refer to the separate Data
List booklet.
■ Channel Aftertouch (CAT)
This event is generated when pressure is applied to a
key after the note is played.
• Data
This represents the amount of pressure applied to the key.
❏ Settings 000~127
■ Polyphonic Aftertouch (PAT)
This event is generated when pressure is applied to a
key after the note is played. Unlike Channel Aftertouch
above, this is recorded and applied independently for
each key pressed.
• Note name
Determines the key to which aftertouch is applied.
❏ Settings C -2~G8
• Data
This represents the amount of pressure applied to the key.
❏ Settings 000~127
■ Registered Parameter Number (RPN)
This event changes parameter values for each tone
generator part.
This event is used to set part settings such as Pitch
Bend Sensitivity or Tuning.
For a complete list of the available RPN numbers and
their corresponding controls, refer to the MIDI Data
Format in the separate Data List booklet.
Control
Number
Function
001 Modulation Wheel
005 Portamento Time
007 Volume
010 Pan (Stereo position)
011 Expression
064 Sustain (Hold 1)
065 Portamento on/off
066 Sostenuto pedal on/off
067 Soft Pedal on/off
071 Harmonic Content (controls Filter Resonance)
074 Brightness (controls Filter Cutoff Frequency)
084 Portamento Source Note Number
120 All Sound Off
Bank Select MSB
Bank Select LSB
Program number
Voice name
Control number Data
Data
Note name Data
RPN MSB-LSB Data Entry
MSB-LSB