Filter
Top Products
282
MOTIF Appendix
Installing Optional Hardware
Appendix
Optional Plug-in Board
Installation
A variety of optional Plug-in boards sold separately let
you expand the voice library of your instrument.
The following types of Plug-in boards can be used with
your instrument.
• PLG150-AN • PLG150-PF • PLG150-VL
• PLG150-DX • PLG100-XG • PLG100-VH
The MOTIF provides three slots for the Plug-in board.
Therefore, up to three boards can be installed to
the rear panel.
n The Vocal Harmony Plug-in board (PLG100-VH) can
installed only to slot 1.
n The Multi part Plug-in board (PLG-100XG) can installed
only to slot 3.
n The Single part Plug-in board can installed to any of
three slots.
1 Turn the MOTIF power off, and disconnect the
AC power cord. Also, make sure to disconnect the
MOTIF from any connected external devices.
2 Remove the large screw from the expansion bay
cover on the rear panel using a Phillips
screwdriver.
Keep the removed screw in a safe place. It will be used
when attaching the cover to the MOTIF again.
3 Remove the ribbon cables that are to be connected
to the Plug-in board from the inside of the MOTIF.
The slots are assigned to the color-coded cables as
follows:
Slot 1 — Orange
Slot 2 — Yellow
Slot 3 — Green
GREEN
YELLOW
ORANGE
3
2
1
Plug-in SLOT
OUTPUT
ASSIGNABLE
OUTPUT
LMONO
PHONES
A
DINPUT
GAIN
L
RR
R
L
GREEN
YELLOW
ORANGE
3
2
1
Plug-in SLOT
OUTPUT
ASSIGNABLE
OUTPUT
LMONO
PHONES
A
DINPUT
GAIN
L
RR
R
L
MOTIF6 / MOTIF7
GREEN
YELLOW
ORANGE
3
2
1
Plug-in SLOT
MOTIF8
GREEN
YELLOW
ORANGE
3
2
1
Plug-in SLOT
OUTPUT
ASSIGNABLE
OUTPUT
L MONO
PHONES
A
D
INPUT
GAIN
RL
R
R
L
GREEN
YELLOW
ORANGE
3
2
1
Plug-in SLOT
Slot 3
Slot 2
Slot 1
Cable for Slot 3
(Green)
Cable for Slot 2
(Yellow)
Cable for Slot 1
(Orange)