Filter
Top Products
72
MOTIF Basic Operation
Display-based Controls
Basic Operation
How to leave the current display
For most operations (especially editing and Job- or Store-related), pressing the [EXIT] button will let you leave the
current display and return you to the next highest level or to the normal play mode display.
Display-based Controls
Data Entry
Confirmation Message
When you execute certain operations, such as those in the Job, Store, and File modes, the MOTIF shows a
confirmation message. This lets you actually execute the operation or cancel it if desired.
If a confirmation message (like the one illustrated above) appears, press the [INC/YES] button to execute the
operation or press the [DEC/NO] button to cancel it.
DEC/NO INC/YES
EXIT
ENTER
EXECUTE
DEC/NO INC/YES
EXIT
ENTER
EXECUTE
1Moving the cursor
Use these four buttons to navigate the display,
moving the cursor around the various selectable
items and parameters in the screen. When
selected, the relevant item is highlighted
(the cursor appears as a dark block with inverse
characters).
2Changing (editing) values
Rotating the data dial to the right (clockwise)
increases the value, while rotating it to the left
(counter-clockwise) decreases it.
For parameters with large value ranges, you can
increase the value by 10 by simultaneously
holding down the [INC/YES] button and pressing
the [DEC/NO] button. To decrease by 10, do the
opposite; simultaneously hold down the [DEC/NO]
button and press the [INC/YES] button.