Filter
Top Products
244
MOTIF Reference
Sampling Job mode
Reference Sampling mode
● [F1]-06 Time-Stretch
This Job lets you change the length of the sample
without changing the pitch.
• Ratio
Determines the length of post-process sample as a ratio of
the length of the original sample (100%). Lower values
compress the sample, while higher values expand the
sample.
❏ Settings 25~400%
• Accuracy
Determines the quality of the resulting sample by
specifying which aspect of the original is to be emphasized:
sound quality or rhythmic feel.
❏ Settings 25~400%
Sound4-Sound1
These settings place emphasis on sound quality, with the
“SOUND 4” setting producing the highest sound quality.
Normal
Produces an optimum balance of sound quality and
rhythmic feel.
Rh
ythm1-Rhythm 2
These settings place emphasis on rhythmic feel, with the
“Rhythm 2” setting producing the most accurate rhythmic
feel.
● [F1]-07 Convert Pitch
This Job lets you change the pitch of the sample
without changing the length.
• Pitch
Determines the amount and direction of pitch shift in
semitone increments.
❏ Settings -12 ~ 0 ~+12
• Fine
Determines the amount and direction of fine pitch shift in
cent increments (1 cent = 1/100th of a semitone).
❏ Settings -50~0~+50
Set the Waveform and Key Bank containing the
sample to be time-stretched.
Press the [ENTER] button to
execute the Job.
Press the [F6] (OK) button to assign the
time-stretched sample to the specified
Key Bank.
Press the [ENTER] button to execute the
operation. If you're not satisfied with the
results, change the Ratio and Accuracy
values and press the [ENTER]
button again. This automatically reverts back
to the original settings and executes the
operation again with the new settings.
Press the [F5] (CANCEL) button to
cancel the operation.
Set the Waveform and Key Bank containing the
sample to be pitch-converted.
Press the [ENTER]
button to execute the Job.
Press the [F6] (OK) button to assign the pitch-
converted sample to the specified Key Bank.
Press the [ENTER] button to execute the operation.
If you’re not satisfied with the results, change the
Pitch and Fine values and press the [ENTER]
button again. This automatically reverts back to the
original settings and executes the operation again
with the new settings.
Press the [F5] (CANCEL) button
to cancel the operation.