Filter
Top Products
38
MOTIF Basic Structure
System Overview
Basic Structure
● Song/Pattern mode
External sequencer
MIDI sequence data
(Song / Pattern)
Tone Generator block (example)
Sequencer block
Port 1 Port 2
(Multi-Part Plug-in
Board)
Port 3
(Single Part Plug-in
Board)
Part 1
Part 2
Part 3
Track 1
Track 2
Track 3
Track 4
Track 15
Track 16
Part 4
Part 15
Part 17
Part 18
Part 30
Part 31
Part 32
PLG1 part
PLG2 part
Part 16
Part 33
Parts 33-46
are not
used.
Part 34
Part 46
Part 47
Part 48
In the Song / Pattern Mixing mode, the only parts
that sound are the currectly selected (edited)
part, and parts having the same receive channel
as the selected one.
MIDI cables by themselves cannot
handle data from multiple ports. If a
MIDI cable is used to transmit data
from an external sequencer, only
the Port 1 parts are used. To take
advantage of the multiple ports of
the MOTIF, use a USB cable.
When the Multi-Part Plug-in board and two Single Part Plug-in
boards have been installed:
Each track of music (MIDI) data sounds a
corresponding part on the MOTIF,
according to the MIDI channel settings.
(The receive channel for each part must
match the transmit channel of each track.)
Keyboard
Controllers
Controller block
KN 1 KN 2 KN 3 KN 4