Filter
Top Products
247
MOTIF Reference
Sampling Job mode
Reference Sampling mode
[F2] Waveform Job
Press the [F2] button in step #3 of the Basic Procedure
on page 240 so that the Waveform Job list appears on
the display. Scroll the cursor to the desired Job and
press the [ENTER] button to go to the display of the
selected Job.
● [F2]-01 Copy
This Job lets you copy the data of one waveform to
another.
● [F2]-02 Delete
This Job lets you delete a specific waveform from
memory.
● [F2]-03 Transpose
This Job lets you transpose the Key bank setting of a
specified waveform.
• Octave
Determines the amount in octaves by which the Key Bank
is transposed. When you want to transpose by less than
one octave, set this to “0” and use the Note parameter
below.
❏ Settings -3~ 0 ~+3
• Note
Determines the amount in semitones by which the Key
Bank is transposed. When you want to transpose by exact
octaves, set this to “0” and use the Octave parameter
above.
❏ Settings -11~ 0 ~+11
● [F2]-04 Name
This Job lets you assign a name to the selected
waveform.
For specific instructions on naming, see “Basic
Operation” on page 75.
[F3] Other Jobs
Press the [F3] button in step #3 of the Basic Procedure
on page 240 so that the following Job list appears on
the display. Scroll the cursor to the desired Job and press
the [ENTER] button to go to the display of the selected
Job.
● [F3]-01 Clean Up Memory
This Job deletes all the waveforms to which User
voices or Sample voices are not assigned.
Select the source waveform.
Select the destination waveform.
Select the waveform to be deleted.
Select the desired waveform for which the
Key Bank setting is to be transposed.
Select a waveform to be named.