Filter
Top Products
230
MOTIF Reference
Pattern Job mode
Reference Pattern mode
● [F4]-08 Clear Phrase
This Job deletes all data from the selected phrase.
Undo/Redo (page 225) cannot be used to undo/redo a
Delete Sample operation.
● [F4]-09 Phrase Name
Basic Operation (page 75)
This Job lets you assign a name (of up to eight
characters) to the selected phrase.
See “Basic Operation” on page 75.
[F5] Track Job
Press the [F5] button in step #3 of the Basic Procedure
on page 225 so that the Track Job list appears on the
display. Scroll the cursor to the desired Job and press
the [ENTER] button to go to the display of the selected
Job.
The following explanations apply to step #6 of the
Basic Procedure on page 225.
● [F5]-01 Copy Track
This Job copies all data of the selected type from
specified source track to specified destination track.
Same as in the Song Job mode. See page 202.
● [F5]-02 Exchange Track
This Job exchanges or “swaps” the specified type of
data between two specified tracks in the current
style and section.
Same as in the Song Job mode. See page 202.
● [F5]-03 Clear Track
This Job deletes all data of the selected type from
the selected pattern track.
Same as in the Song Job mode. See page 202.
● [F5]-04 Normalize Play Effect
This job rewrites the data in the selected track so
that it incorporates the current Grid Groove
settings.
Same as in the Song Job mode. See page 203.
Phrase to be cleared
When this box is checkmarked, sample data
assigned to the selected phrase will be deleted.
This parameter has no effect when no sample
voice is used by the selected phrase.
Types of data to be copied
Source style, ection, and track
Destination style, section, and track
Target tracks for the Exchange operation
Types of data to be exchanged
Types of data to be cleared
Section and track from which data is to be cleared