5-28 Functional Information
EN
Variable Fusing Temperature
Figure 5-15 Fusing Temperature Control
Variable Fusing Temperature is a feature that gives the user or
service technician the ability to adjust the fusing temperature based
on the media being used in the printer. The default mode is Normal
and should be optimal for most users. There is an optional Vellum,
Low, Normal, and High Fuser Mode selection. If very heavy or rough
media is being used, then High Fuser Mode is beneficial. If
transparencies or light media are being used, then Low Fuser Mode
might be appropriate. CONFIGURE FUSER MODE is in the Paper Handling
Menu and when set to the default of NO, paper types are not displayed
in the menu. When CONFIGURE FUSER MODE is set to YES, the different
paper types are then displayed in the menu.
