A SERVICE OF

logo

EN
Removing Covers
6-15
Control Panel Overlay and Control Panel
1
Remove the Top Cover (page 6-12).
2
The Control Panel Overlay is held in place on the Top Cover by
two tabs on each side. Slide a small flat-blade screwdriver along
the outside edge of the Control Panel Overlay, to disengage the
two tabs on the outside of the cover.
3
Lift the Overlay off of the Control Panel.
Figure 6-7
Releasing Control Panel Overlay
4
Remove the single self-tapping screw holding the Control Panel
to the underside of the Top Cover.
5
Lift up on the metal plate gently to free the Control Panel.
6
Grasp the Control Panel by the metal frame and remove it from
the underside of the Top Cover. See Figure 6-8, “Back Side of Top
Cover,” on page 6-16.