A SERVICE OF

logo

Open as PDF
next previous
6-44 Removing and Replacing Parts
EN
3 Remove the two machine screws in the center of the printer,
under the Registration Assembly Roller Guide. See Figure 6-35.
Figure 6-35 Location of two “common” screws (inside printer)
4 Remove the paper tray, and tilt the printer back, with the front
facing up.
5 Remove the five self-tapping screws that hold the Paper Feed
Roller Assembly to the chassis. They are located on the bottom of
the printer. See Figure 6-36.
Item Explanation
A
Screws