A SERVICE OF

logo

6-34 Removing and Replacing Parts
EN
Main Gear Assembly
1 Remove the Top Cover (page 6-12) and the Left Cover
(page 6-23).
2 The Main Motor is located on a PCA (see Figure 6-26) on the
back side of the Gear Assembly. Disconnect the Main Motor
Cable.
3 Remove five self-tapping screws and the grounding screw
(spring-loaded machine screw) that hold the Gear Assembly to
the chassis.
Figure 6-26 Main Gear Assembly, Left Side
Item Explanation
A
Main Motor Cables
B
Self-tapping Screws
C
Grounding Screw