A SERVICE OF

logo

6-50 Removing and Replacing Parts
EN
Paper Feed Belt Assembly
1 Remove the Top Cover (page 6-12), Left Cover (page 6-23), and
Main Gear Assembly (page 6-34), DC Controller (page 6-46), and
Transfer Roller Assembly (page 6-28).
2 Facing the front of the printer, remove the machine screws on
each side of the Belt Assembly.
3 Raise the Registration Assembly by the small green handle, and
lift out the Belt Assembly.
4 Remove the plastic guide (A) in Figure 6-41 and replace the belts
if necessary. The guide snaps back in after belt replacement.
.
Figure 6-40 Paper Feed Belt Assembly
Item Explanation
A
Paper Feed Belt Assembly Screws