3-8 Printer Operation
EN
TRAY 4 TYPE=
PLAIN
For supported paper types
see page 1-14.
This item appears only when a fourth
paper tray is installed. Set the value
to correspond with the paper type
currently loaded in Tray 4.
MANUAL FEED=OFF OFF
ON
Feed the paper manually from Tray 1,
rather than automatically from a tray.
When
MANUAL FEED=ON
and Tray 1
is empty, the printer goes offline
when it receives a print job and
displays
MANUALLY FEED [PAPER
SIZE]
.
DUPLEX=OFF OFF
ON
This item appears only when an
optional duplexer is installed. Set the
value to
ON
to print on both sides
(duplex) or
OFF
to print on one side
(simplex) of a sheet of paper.
BINDING=
LONG EDGE
LONG EDGE
SHORT EDGE
This item appears only when an
optional duplexer is installed and the
duplex option is on. Choose the
binding edge when duplexing
(printing on both sides of paper).
OVERRIDE A4 WITH
LETTER=NO
NO
YES
Choose
YES
to print on letter size
paper when an A4 job is sent, but no
A4 size paper is loaded in the printer
(or to print on A4 size paper when a
letter job is sent, but no letter paper
is loaded in the printer).
Table 3-5. Paper Handling Menu (continued)
Item Values Explanation
