A SERVICE OF

logo

EN
Control Panel Menus
3-9
CONFIGURE FUSER MODE
MENU=NO
NO
YES
Configure the fuser mode associated
with each paper type. (This is only
necessary if you are experiencing
problems printing on certain paper
types.)
NO
:
The fuser mode menu items are
not accessible.
YES
:
Additional items appear (see
below).
Note
To see the default fuser mode for
each paper type, select
YES
, scroll
back to the Information Menu, and
print a menu map (page 3-6).
[TYPE]=
NORMAL
NORMAL
LOW
HIGH
VELLUM
This item appears only when
CONFIGURE FUSER MODE
MENU=YES
. Most paper types are set
to
NORMAL
by default.
ROUGH=HIGH
VELLUM=VELLUM
For a complete list of supported paper
types, see page 1-14.
Table 3-5. Paper Handling Menu (continued)
Item Values Explanation