1-6 Printer Description
EN
Site Requirements
The following environmental specifications must be maintained to
ensure the proper operation of the printer. Consider the following
points before installing the printer:
●
Install in a well-ventilated, dust-free area.
●
Install on a hard, flat and continuous surface, with all four printer
feet level. Do not install on carpet or other soft surfaces.
●
Ensure adequate power is supplied. Printer power requirements
are listed in Table 1-3.
●
Install where temperature and humidity is stable, away from water
sources, humidifiers, air conditioners, refrigerators, or other major
appliances.
●
Install away from direct sunlight, open flames, or ammonia fumes.
If the printer is placed near a window, make sure the window has
a curtain or blind to block any direct sunlight.
●
Install with enough space around the printer for proper access
and ventilation.
●
Install printer away from the direct flow of exhaust from air
ventilation systems.
Table 1-3. Electrical Specifications
Volts Frequency Amps Watts (typical)
100-127 VAC±10% 50/60 Hz ±3Hz 11 amps printing = 365
standby = 40
PowerSave On = 27 (EPA
E
NERGY
S
TAR
®)
220-240 VAC±10% 50/60 Hz ±3Hz 5 amps printing = 355
standby = 40
PowerSave On = 22 (EPA
E
NERGY
S
TAR
®)
