EN
Troubleshooting the Printing System
7-31
41.3 UNEXPECTED
PAPER SIZE
The paper size you are
trying to print is not the
same as the settings for
the tray.
1. Make sure that all trays
are correctly adjusted for
size.The size displayed on
the front of the paper tray
must match the size of
paper loaded in the tray.
(The printer will continue
trying to print the job until
size settings are correct.)
If you are trying to print
from Tray 1, make sure
the printer’s Control Panel
setting for paper size is
correctly configured.
2. After performing the
actions above, press
[Go]
. The page containing
the error will
automatically be
reprinted. (Or, you might
want to press
[Cancel
Job]
to clear the job from
the printer’s memory.)
41.x
PRINTER ERROR
alternates with
PRESS GO TO
CONTINUE
A temporary printing error
occurred.
X Description
1 Unknown misprint error.
2 Beam detect error.
4 No VSYNC error.
5 Media feed error.
9 Noise VSREQ error.
Press
[Go]
. The page
containing the error will
automatically be
reprinted.
If the error persists:
1. Reseat the
connections to the Laser
Scanner and the Engine
Controller Board.
2. Replace the Laser
Scanner.
3. Replace the Engine
Controller Board.
Table 7-6. Numerical Printer Messages (continued)
Control Panel
Message
Event
Log
Message
Explanation Recommended
Action
