A SERVICE OF

logo

Open as PDF
next previous
7-20 Troubleshooting
EN
INSTALL TRAY x
The printer is unable to
print the current job
because the specified tray
(
x
) is open or not inserted
correctly.
1. Re-insert the specified
tray.
2. Check for damaged
tabs in the tray.
3. Check for damaged
switches in the printer.
4. Replace the PCA
Controller in the feeder.
LOADING
PROGRAM <number>
alternates with
DO NOT POWER OFF
Programs and fonts can
be stored on the printer’s
file system. At bootup time
these entities are loaded
into RAM. (These entities
can take a long time to
load into RAM depending
on the size and number of
entities being loaded.)
The
<number>
specifies
a sequence number
indicating the current
program being loaded.
Wait for the program to
load.
MANUALLY FEED
[TYPE] [SIZE]
One of the following
occurred:
A manual feed was
requested.
There is no paper in
Tray 1.
The wrong size of paper is
loaded.
The Control Panel is not
set for the kind of paper
loaded.
1. Load the requested
paper into Tray 1.
2. Press
[Go]
if the
desired paper is already
loaded in Tray 1.
3. Press
[-Value+]
to
scroll through the
available types and sizes.
4. Press
[Select]
to
accept the alternate type
or size.
Table 7-5. Alphabetical Printer Messages (continued)
Control Panel
Message
Event Log
Message
Explanation Recommended
Action