A SERVICE OF

logo

6-18 Removing and Replacing Parts
EN
Front Cover and Tray 1
Front Cover and Tray 1 must be removed individually. See Figure
6-10.
1 Open the Front Cover door.
2 Disengage the Tray 1 Guide pins from inside the Front Cover by
pushing the Guides (C) outward. The Cover and Tray 1 will be
separated. Press Tray 1 Guide against the printer.
Figure 6-10 Front Cover
3 Release the Front Cover, allowing it to pivot freely on its keyed
pins. The Tray will slide off the pins to the right at its lowest
position.
Item Explanation
A
Front Cover
B
Tray 1 Guide
C
Guides