A SERVICE OF

logo

EN
Removing Assemblies
6-41
Tray 1 Roller
1
Open the Top Cover and remove the Toner Cartridge.
2
Facing the front of the printer, raise the green center handle of the
Registration Assembly.
3
Depress the locking tab on the right side roller cam, and slide the
cam to the right.
4
Remove the D-Roller from the shaft.
Figure 6-32
Tray 1 Roller
Hint
To reassemble the roller, orient the D-Roller so that the thumb grip is
on the left. Then, slide the Roller between the two cams.
Locking
Tab
Cam