3-22 Printer Operation
EN
RAM DISK
SIZE=xxxK
0K
and up
(This value depends on
the amount of installed
memory.)
Determine the size of the RAM disk. This
item appears if
RAM DISK
=
ON
or
AUTO
.
Press
[-Value+]
to change settings by
increments of 100.
Note
This setting cannot be changed if
RAM
DISK=AUTO
. Changing this value will cause
the printer to reinitialize when it becomes
idle.
JAM RECOVERY=
AUTO
AUTO
ON
OFF
Determine how the printer behaves when a
paper jam occurs.
AUTO
: The printer automatically selects the
best mode for printer jam recovery (usually
ON
). This is the default setting.
ON
: The printer automatically reprints pages
after a paper jam is cleared.
OFF
: The printer does not reprint pages
following a paper jam. Printing performance
might be increased with this setting.
PAPER
REFORMING=OFF
OFF
ON
Paper reforming has two main purposes:
1. To reduce jams, wrinkles, and bent
corners when printing on both sides of a
sheet of paper (duplexing).
2. To reduce bent corners and wrinkles
when printing on one side of a sheet of
narrow media (such as legal, rotated letter,
or rotated A4).
Print speed will be slower when
PAPER
REFORMING=ON
.
Table 3-8. Configuration Menu (continued)
Item Values Explanation
