A SERVICE OF

logo

EN
Removing Assemblies
6-69
Laser Scanner Assembly
1
Remove the Top Cover (page 6-12) and the Face Down Assembly
Base (page 6-21).
2
Facing the back of the printer, remove the four black screws
holding the assembly to the chassis.
3
Disconnect the cables B, C, and D on each side of the assembly.
4
Remove the protective plastic and disconnect the 4-pin connector
on the back of the Laser Scanner Assembly.
5
Lift the Laser Scanner Assembly out of the chassis.
Figure 6-58
Laser Scanner Assembly (top inside view of printer)
Item Explanation
A
Screws
B
3-Pin Connector
C
8-Pin Connector
D
4-Pin Connector, under protective foam
E
Screws
F
Protective Plastic