3-24 Printer Operation
EN
I/O Menu
Items in the I/O (input/output) Menu affect the communication
between the printer and the computer.
Table 3-9. I/O Menu
Item Values Explanation
I/O TIMEOUT=15 5
to
300
Select the I/O timeout period in seconds. (I/O
timeout refers to the time, measured in
seconds, that the printer waits before ending a
print job.)
This setting allows you to adjust timeout for best
performance. If data from other ports appear in
the middle of your print job, increase the timeout
value.
Press
[- Value +]
once to change settings by
increments of 1, or hold down
[- Value +]
to
scroll by increments of 10.
I/O BUFFER=AUTO AUTO
ON
OFF
Allocate memory for I/O buffering.
AUTO
:
The printer automatically reserves
memory for I/O buffering. Additional
configurations are not required and the
I/O BUFFER SIZE
menu item does not
appear.
ON
:
The
I/O BUFFER SIZE
item appears (see
below). Specify the amount of memory to be
used for I/O buffering.
OFF
:
I/O buffering is not performed and the
I/O BUFFER SIZE
item does not appear.
When the I/O buffer setting is changed, any
downloaded resources (such as fonts or
macros) will need to be downloaded again,
unless they are stored on an optional hard disk
or flash DIMM.
