A SERVICE OF

logo

EN
Removing Assemblies
6-53
5
Release the tabs of the gear on the left side of the shaft, outside
the chassis, and slide the gear off.
6
Slide the shaft to the right, and then angle it out of the chassis.
Hint
Make sure that the Tray 1 Lift Plate (with spring) is pressed down before
installing the Tray 1 Shaft. The Shaft captivates the Tray 1 Lift Plate,
and must be installed on top of it.
Item Explanation
A
Tray 1 Shaft Gear
B
Tray 1 Release Tabs