A SERVICE OF

logo

6-20 Removing and Replacing Parts
EN
Front Cover Pins
1 Remove the Front Cover and Tray 1 (page 6-18).
2 Remove the screws (A) to free the Front Cover Pins.
Figure 6-12 Front Cover Pins
Hint To install a self-tapping screw, first turn it to the left until it clicks,
indicating the threads are seated. Then, turn it to the right to tighten.
Do not over-tighten. If a self-tapping screw-hole becomes stripped,
repair of the screw-hole or replacement of the affected assembly is
required.
Item Explanation
A
Screws