A SERVICE OF

logo

6-56 Removing and Replacing Parts
EN
Tray 1 Lift Plate
1 Remove the Front Cover (page 6-18), Tray 1 Shaft (page 6-52),
Top Cover (page 6-12), Left and Right Side Covers (page 6-23).
2 Rotate the Tray 1 Lift Plate until the opening of the hook faces up.
Then, press down on each hook until it slips off the shaft on which
it is mounted. When you remove the Lift Plate, be careful not to
lose the spring, as it is not captive.
Figure 6-45 Tray 1 Lift Plate
Item Explanation
A
Spring
B
Tray 1 Lift Plate
C
Hooks
D
Paper Sensor Flag Slot