Filter
Top Products
111
Error Messages/Other Messages
Error Messages
Indication: MIDI Buffer Full
Situation: Due to an inordinate volume of MIDI messages
received, the RD-700SX has failed to process
them properly.
Action: Reduce the amount of MIDI messages to be
transmitted.
Indication: MIDI Communication Error
Situation: A problem has occurred with the MIDI cable
connections.
Action: Check that MIDI cables are not broken or pulled
out.
Indication: BULK DUMP: Receive Data Error
Situation: A MIDI message was received incorrectly.
Action: If the same error message is displayed
repeatedly, there is a problem with the MIDI
messages that are being transmitted to the RD-
700SX.
Indication: File Error
Situation: A file can’t be read. Or a file may be broken.
Action: Be sure you’re using
Standard MIDI Files (“MID” is
used as the extension)
and
Setup Files (“RDS“ is used
as the extension)
.
Indication: System Error
Situation: There may be a problem with the system.
Action: Turn on the power once again, then repeat the
procedure.
Other Messages
Indication: Now, writing Bulk Dump Data. Keep on
POWER!!
Situation: Indicated when Bulk Dump data is being
received.
Action: Once received, the data is written to the RD-
700SX’s internal memory; be absolutely sure not
to turn off the power until “COMPLETED”
appears in the display.
Indication: Unavailable while in Rec Mode
Situation: This is displayed when the [EXTERNAL/
INTERNAL] button is pressed with Rec Mode
“ON.”
Action: When Rec Mode is “ON,” you cannot change
the External settings. To make changes to the
External settings, set Rec Mode to “OFF”
(p. 101).
Indication: Memory Full!
Situation: There is not sufficient space left on the user
memory.
Action: Delete files stored on the RD-700SX memory.
Indication: File Exists. Overwrite OK?
Situation: A file with the same name is already exists.
Action: If you execute the procedure, the file will be
overwrite. If you don’t want to overwrite,
change a filename.
Indication: Can not Save
Situation: The save could not be performed correctly.
Action: The internal memory capacity of the RD-700SX
may be full. Delete files stored on the RD-700SX
memory.
Indication: Can not Delete
Situation: The data cannot be deleted.
Action: Select the File Type to “ALL FILES” in the
DELETE screen, then repeat the procedure.
Indication: Panel is Locked
Situation: Buttons will not function.
Action: Press [EXIT] to cancel.
RD-700SX_e.book 111 ページ ２００６年３月２３日 木曜日 午後２時５２分