Filter
Top Products
13
Panel Descriptions
fig.buttons
[TRANSPOSE]
Sets the range of the keyboard to transposed (p. 42).
6. DISPLAY
This shows the Tone names and the values of various settings, etc.
[SHIFT/EXIT]
Pressed to return to a previous screen or to cancel a procedure that is
in progress.
Additionally, you can easily call up Edit screens for related
parameters for the following functions by holding down this button
while pressing buttons, turning knobs, or operating other controllers
(p. 155).
[F1/TONE INFO]
This allows you to change the tone settings (p. 70).
You can also use this to assign functions in some screens.
[F2/ZONE INFO]
This allows you to change the zone settings (p. 68).
You can also use this to assign functions in some screens.
[ENTER]
This is used to finalize a value or execute an operation.
7. CONTRAST knob
Adjusts the display’s contrast (p. 26).
8. CURSOR [ ], [ ], [ ], [ ]
Press these to switch pages and to move the cursor.
9. [DEC], [INC]
This is used to modify values.
If you keep on holding down one button while pressing the other,
the value change accelerates.
10. ONE TOUCH
[PIANO]
Selects the optimum settings for piano performances (p. 32).
[E.PIANO]
Selects the optimum settings for E.piano performances (p. 32).
[SETUP]
Calls up the stored settings (Setup) (p. 56).
11. ZONE SELECT buttons
Selects the zone for which the tone is to be selected (p. 40).
12. EXPANSION [A], [B]
This selects a sound from a wave expansion board, sold separately
(p. 35).
13. FUNCTION
[EDIT]
Press this button when you wish to adjust various settings (p. 78).
[WRITE]
Stores the current settings to “Setup” (p. 58).
[NUM LOCK]
You can input numerical values with the TONE SELECT buttons
when this button is lit (p. 34).
In addition, you can listen to the demo songs by simultaneously
pressing this button and [EDIT] (DEMO PLAY) (p. 31).
14. TONE SELECT buttons
Pressed to select tones (p. 33).
You can also input numerical values with these buttons when the
[NUM LOCK] button is on. [NUM LOCK] turns on automatically in
the Edit and other screens, enabling input of numerical values with
the buttons.
fig.Bender
Pitch Bend/Modulation Lever
This allows you to control pitch bend or apply vibrato (p. 44).
6
7
9
8
10
11
12
13
14
RD-700SX_e.book 13 ページ ２００６年３月２３日 木曜日 午後２時５２分