Filter
Top Products
73
Making Detailed Settings for the ONE
TOUCH Tones
You can make more detailed settings to fashion just the Tones you
want using the piano Tone selected by pressing ONE TOUCH
[PIANO] (p. 32).
This function is called “Piano Edit.”
Furthermore, you can save up to two of the changed settings.
The Piano Edit settings and ONE TOUCH [PIANO] Type A or B is
stored in memory.
When ONE TOUCH [PIANO] is pressed, all settings other than
the Piano Edit settings are switched to their status at the time
the RD-700SX’s power was turned on. Store any arrangements
of settings that you want to keep in Setup (p. 58).
1.
Press [F1] in the ONE TOUCH [PIANO] screen to
select the type you want to set.
Pressing [F1] toggles you between Types A and B.
2.
Press [F2 (EDIT)].
A Piano Edit screen will appear.
fig.04-05-1g
fig.04-05-2g
3.
Press CURSOR [ ]/[ ] to switch screens, and
press CURSOR [ ]/[ ] to move the cursor to
the parameter to be set.
Move the cursor to one of the following menus and press
[ENTER], then select the parameter you want to set in the
screen that follows.
1. Key Touch Edit
2. Micro Tune Edit
3. Sym. Resonance
4. Tone Modify
5. Initialize
4.
Press [INC]/[DEC] to set the value.
5.
If you want to save the setting, press [F1 (WRITE)].
The confirmation message appears. Press [F1 (WRITE)] to save
the settings. If you want to cancel, press [EXIT].
6.
When you finish making settings, press [EXIT].
You are returned to the ONE TOUCH [PIANO] screen.
Depending on the piano Tone selected, this setting may not be
available.
This chooses the piano Tone to be selected when ONE TOUCH
[PIANO] is pressed.
There are 20 Tones to choose from.
Adjusts the spaciousness of the sound.
This changes the Tone’s subtle nuances by altering the phase of the
left and right sounds.
This effect is difficult to hear when headphones are used.
Changing the sound’s ambience allows you give your performances
a sound resembling that obtained in a wide open space.
Adjusts the depth of the Reverb effect. This functions the same way
as the REVERB knob, but the setting made here can be called up
simply by pressing ONE TOUCH [PIANO].
Making Detailed Settings
for the Piano Tones
(Piano Edit)
Making the settings
Selecting the Piano Sound
Changing the Width of the Sound
(Stereo Width)
Parameter Value Description
Stereo Width CENTER,
L01-01R–
L63-63R
The higher the value set, the wider
the sound is spread out.
Changing the Sound’s Nuance
(Nuance)
Parameter
Value
Nuance
TYPE1, 2, 3
Changing the Sense of Space
Surrounding the Sound (Ambience)
Parameter
Value Description
Ambience
OFF, 1–5 The effect becomes deeper as the
value is increased.
Changing the Amount of Reverb
Effect (Reverb Level)
Parameter
Value Description
Reverb Level
0–127 The reverb effect becomes
stronger as the value is increased.
RD-700SX_e.book 73 ページ ２００６年３月２３日 木曜日 午後２時５２分