Filter
Top Products
56
Using the Convenient Functions in Performances
The RD-700SX’s INTERNAL ZONE (p. 28) and EXTERNAL ZONE (p. 28) tone
settings, effect settings, and other such settings are collectively referred to as a
“Setup.”
Once you’ve stored your preferred settings, and settings for the songs to be
performed as a Setup, you can then switch whole groups of settings during a
performance just by switching Setups.
You can store up to 100 different Setups.
The RD-700SX is shipped from the factory with recommended Setups already
prepared.
You can also register the Setups you like and use frequently to the TONE SELECT
buttons. These registered Setups are called the “Favorite Setups.”
This function allows you to select Setups more quickly.
Now try actually calling up a Setup.
fig.Q2-16p
1
Press [SETUP], getting the indicator to light.
At this time, turn [NUM LOCK] off.
The Setup screen, shown below, appears in the display.
fig.Q2-17g
2
Press [F2 (BANK CHANGE)] to select a bank.
When you press [F1], a list of the Setups registered to the buttons for the selected
bank is displayed.
Hold down [F1] and press CURSOR [ ]/[ ] to switch the screens.
fig.Q2-17g
3
Press one of the TONE SELECT buttons to select a Setup.
4
Try playing the keyboard.
The settings are switched to those of the Setup that has been called up.
Selecting Stored Settings ([SETUP])
The current settings are erased
when a Setup is called up. Be
sure to save any Setup you
would like to keep first before
calling up another Setup (p.
58).
2 1
3
There are four banks, A, B, C,
and D. Each time you press
[F2], the bank is switched in
the following sequence: A → B
→ C → D → A →...
RD-700SX_e.book 56 ページ ２００６年３月２３日 木曜日 午後２時５２分