Filter
Top Products
84
Detailed Settings for Each Function ([EDIT])
This sets the sound to play at a fixed volume, regardless of the
strength used to play the keyboard (the velocity).
This sets the interval from the time the key is played to when the
sound is produced.
As the value is decreased, the timing of the sound is delayed more
when more force is used to play the keys.
As the value is increased, the timing of the sound is delayed more
when less force is used to play the keys.
This setting changes the touch sensitivity according to the key range
being used.
As the value is increased, the touch becomes heavier in the upper
registers, and lighter in the lower keys.
You can change the functions assigned to the pedals, sliders, and
MULTI EFFECTS [CONTROL] knob settings.
1.
Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.
fig.05-06g
2.
Press CURSOR [ ]/[ ] to select “2.Control/
EQ.”
3.
Press [ENTER] to display the Edit screen.
fig.05-07-1g
fig.05-07-2g
fig.05-07-3g
4.
Press CURSOR [ ]/[ ] to switch screens, and
press CURSOR [ ]/[ ] to move the cursor to
the parameter to be set.
5.
Press [INC]/[DEC] to set the value.
6.
When you have finished making the settings, press
[EDIT], extinguishing its indicator.
You are returned to the Tone screen.
For more on the following parameters, refer to the
corresponding pages.
Harmonic Bar
→
p. 54
Setting a Constant Volume Level in
Response to the Playing Force
(Velocity)
Parameter
Value Description
Velocity
REAL Volume levels and the way sounds
are played change in response to the
velocity.
1–127 Values for the volume and the way
sounds are played remain constant.
Changing the Timing of Sounds in
Response to the Velocity
(Velocity Delay Sens)
Parameter Value
Velo Delay Sens -63–+63
Changing the Touch Sensitivity
According to the Key Range
(Velocity Keyfollow Sens)
Parameter Value
Velo Keyfolw Sens -63–+63
Pedal and MULTI EFFECTS
[CONTROL] Knob Settings
(Control)
How to Make Settings
RD-700SX_e.book 84 ページ ２００６年３月２３日 木曜日 午後２時５２分