Filter
Top Products
54
Using the Convenient Functions in Performances
4
When the ZONE LEVEL sliders are moved, the harmonic bars move in
the display, and the tone changes.
By pressing the ZONE SWITCH buttons on and off, you can adjust the sounds for
other Feet.
If the cursor is moved to the value at the bottom of the screen, you can adjust the
sounds for Feet with [DEC] and [INC].
5
Press CURSOR [ ]/[ ] to move the cursor to <Perc> and press
[DEC]/[INC] to change the value.
Perc (Percussion) adds an attack-type sound to the beginning of the note to give the
sound more crispness. The attack sound changes according to the value.
While the Tone Wheel screen is displayed, you can change the undulation rate of the
Rotary effect with the Pitch Bend lever.
The Rotary effect is an effect that recreates the sound of the rotating speakers used
to augment the sound of an organ.
The Rotary effect is set to alternately rotate more rapidly or slowly when the Pitch
Bend lever is moved to the left and right; the direction is not fixed.
You can change the Feet assigned to each of the ZONE LEVEL sliders used in Tone
Wheel mode.
1
Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.
fig.Q2-13g
2
Press CURSOR [ ]/[ ] to select “2.Control.”
3
Press [ENTER] to display the Edit screen.
Settings
Description
OFF
No percussion is added.
2nd Percussion sounds at a pitch one octave above that of the key
pressed.
3rd Percussion sounds at a pitch an octave and a fifth above that
of the key pressed.
Slow The percussion’s attenuation time is lengthened. This softens
the sense of attack.
Fast The percussive sound will decay more quickly. This gives
more of a sense of attack for a sharp sound.
Changing the Undulation of the Organ Tone
(Rotary Effect)
Changing the ZONE LEVEL Slider Feet Assignments
(Harmonic Bar)
The Percussion is applied only
to the UPPER Tone.
When percussion is on, the 1’
pitch will not be produced
(p. 53).
The settings changed here are
stored to each Tone. Even
when you exit from Tone
Wheel mode, you can press
[ORGAN] to select the Tone
with the changed settings.
This Pitch Bend Lever setting
is effective only in the Tone
Wheel screen.
RD-700SX_e.book 54 ページ ２００６年３月２３日 木曜日 午後２時５２分