Filter
Top Products
30
Overview of the RD-700SX
[EDIT]
By pressing [EDIT] to make the indicator light, you can enter
“Edit mode.” In Edit mode you can make detailed settings for
various functions.
You can exit Edit mode by pressing [EDIT], extinguishing its
indicator.
[WRITE]
Stores the current settings to “Setup” (p. 58).
[NUM LOCK]
When [NUM LOCK] is pressed, the button’s indicator lights up,
enabling input of numerical values using the TONE SELECT
buttons. The button indicators automatically light according to
the values set.
fig.00-G08p
The CURSOR buttons are used for switching screens, and for
moving to an item whose setting you want to change (by
moving the cursor).
Moving Between Display Pages
When arrow symbols (“ ” and “ ”) appear at the upper right of
the display screen, it indicates that there are additional pages in
the directions shown by the arrows.
You can switch screens with CURSOR [ ] and [ ].
fig.00-G09g
Navigating Among Items To Be Set
(CURSOR)
When more than one parameter is present in a screen, the name
and value of the parameter to be changed is shown with a box
around it. This box is referred to as the “cursor.” The cursor is
moved with the CURSOR buttons.
fig.00-G10g
Additionally, when multiple parameters are presented
horizontally in a row, as shown in the EXTERNAL screen, you
can get the cursor to move more rapidly by holding down the
CURSOR button that points in the direction you want the cursor
to move while you also press the CURSOR button that points in
the opposite direction.
fig.00-G11pj
fig.00-G12p
When changing settings values, you can use [DEC] and [INC], or
the TONE SELECT buttons (numeric keys).
[DEC], [INC]
Pressing [INC] increases the value, and [DEC] decreases it. Keep
the button pressed for continuous adjustment. For faster value
increases, keep [INC] pressed down and press [DEC]. For
decreasing value faster, keep [DEC] pressed down and press
[INC].
Simultaneously pressing [DEC] and [INC] sets that parameter to
the standard default value or switches it off.
TONE SELECT Buttons
(Numeric Keys)
When [NUM LOCK] is on (lit), numerical values can be input
directly using the TONE SELECT buttons, which then serve as
[0]–[9] numeric keys. When you enter the number, the value will
blink. This indicates that the value has not yet been finalized. To
finalize the value press [ENTER].
With some parameters, [NUM LOCK] may come on
automatically, allowing you to input numerical values directly
with the TONE SELECT buttons.
Only numerical values can be entered using the numeric keys.
To switch the positive (+) or negative (-) signs for numerical
values and make continuous changes in the numerical values,
press [INC] or [DEC].
About the CURSOR Buttons
Cursor
Changing the Settings Values
RD-700SX_e.book 30 ページ ２００６年３月２３日 木曜日 午後２時５２分