Filter
Top Products
98
Detailed Settings for Each Function ([EDIT])
V-Link Mode
This selects the type of MIDI message output.
V-Link Tx Channel
This selects the MIDI channel used in outputting messages.
V-Link OUT Port
This selects the port used for outputting messages.
Key Range
Selecting the Range of Keys to Use as the V-Link Controller.
Lowest No
This sets the number that is output when the lowest key in the range
set with Key Range is pressed.
Local ON/OFF
This setting determines whether or not the RD-700SX’s sounds are
played when a key within the range set with Key Range is pressed.
1.
The function is alternately turned on or off each time
press [F2] in the EDIT V-Link screen.
Utility includes functions for sending data to external MIDI
sequencers and other devices and for restoring the settings to their
original factory state.
For more on “Rec Setting” in Utility menu, refer to
“Settings
for Recording (Rec Setting)”
(p. 101).
You can transfer the contents of Setups and the RD-700SX’s system
settings to an external MIDI device. This operation is called “bulk
dump.”
Use this procedure to save the data to an external MIDI device in
situations such as when you want to perform by connecting another
RD-700SX with the same settings, or to prevent your Setups and
system settings from corruption.
1.
Use a MIDI cable (optional) to connect the RD-
700SX’s MIDI OUT connector to the MIDI IN
connector on an external sequencer.
2.
Press [EDIT], getting its indicator to light.
The Edit Menu screen appears.
fig.05-28g
3.
Press CURSOR [ ] to select “9.Utility.”
4.
Press [ENTER] to display the Edit screen.
fig.05-29g
5.
Press CURSOR [ ]/[ ] to select “1. Bulk Dump
Temporary” or “2. Bulk Dump SETUP.”
Detailed Settings of V-Link
Parameter
Value Description
V-Link
Mode
BANK/PC PC (Clip) output with the white keys,
Bank Select (Pallet) output with the
black keys
NOTE Note output
Parameter
Value
V-Link Tx Channel
1–16
Parameter
Value
V-Link OUT Port
ALL, OUT1, OUT2, USB
Parameter
Value
Key Range
A0–C8
Parameter Value Description
Lowest No 1–128 When V-Link Mode is set to BANK/PC
0–127 When V-Link Mode is set to NOTE
Parameter Value Description
Local ON/
OFF
LOCAL
OFF
No sounds are played, even when keys
in the range set in Key Range are
pressed.
LOCAL
ON
Sounds are played when keys in the
range set in Key Range are pressed.
Other Functions (Utility)
Transferring the RD-700SX’s
Settings to an External MIDI Device
(Bulk Dump)
Parameter
Value
Bulk Dump Temporary
The contents of the currently
selected Setup are transmitted.
Bulk Dump SETUP The contents of Setups in the
specified range are transmitted.
RD-700SX_e.book 98 ページ ２００６年３月２３日 木曜日 午後２時５２分