Filter
Top Products
42
Performing with the Keyboard
You can transpose performances without changing the keys you are playing, as well
as change the pitch by an octave. This feature is called “Transpose.”
This is a convenient feature to use when you want to match the pitch of the keyboard
performance to a vocalist’s pitch, or perform using the printed music for trumpets or
other transposed instruments.
The reference Transpose setting is C4, and the setting can be adjusted in semitone
units in a range of -48–0–+48.
fig.Q1-22p
1
Hold down [TRANSPOSE] for several seconds.
A screen such as the following appears, and the current value of the setting is
displayed.
fig.Q1-23g
2
Hold down [TRANSPOSE] and press a key.
For example, to have “E” sound when you play “C” on the keyboard, hold down
[TRANSPOSE] and press the E4 key. The degree of transposition then becomes “+4.”
When you release [TRANSPOSE], the previous display will reappear.
When the amount of transposition is set, the Transpose function switches on, and
[TRANSPOSE] lights up
When the transpose value is set to “0,” the button’s indicator will remain dark even
if you press the [TRANSPOSE].
3
To turn off Transpose, press [TRANSPOSE] so that its indicator goes
off.
The next time [TRANSPOSE] is pressed, the sound is transposed by an amount
corresponding to the value set here.
Transposing the Key of the Keyboard ([TRANSPOSE])
Note messages from MIDI IN
connector will not be
transposed.
1,2,3
You can also transpose by
holding down the
[TRANSPOSE] and pressing
the [INC] or [DEC].
Even when the Transpose
function is turned on, the Split
Point remains unchanged
(p. 39).
You can set the degree of
transposition for each of the
Zone individually. For details,
refer to “Setting the
Transposition for Each
Individual Zone (Transpose)”
(p. 69).
RD-700SX_e.book 42 ページ ２００６年３月２３日 木曜日 午後２時５２分