Filter
Top Products
91
Detailed Settings for Each Function ([EDIT])
This procedure deletes Setup files and song data loaded from
computers that have been saved in memory.
1.
Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.
fig.05-17g
2.
Press CURSOR [ ]/[ ] to select “5.File Utility/
USB,” then press [ENTER].
The Edit screen appears.
fig.05-18g
3.
Press CURSOR [ ]/[ ] to select “2. File Delete,”
then press [ENTER].
The following screen appears.
fig.05-19g
4.
Press [F2] to select the type of file to be deleted.
The file type switches each time [F2] is pressed.
5.
Use CURSOR [ ]/[ ] to select the file you want
to delete.
6.
Press [F1 (DELETE)].
The confirmation message appears.
fig.05-20g
If you do not want to delete the file, press [EXIT].
7.
Press [ENTER] to delete the file.
8.
Press [EDIT], extinguishing its indicator.
You are returned to the Tone screen.
The sixteen Parts played by the RD-700SX’s internal sound generator
are referred to as “Internal Parts.”
When connecting an external MIDI device to a sequencer or other
device, by assigning the Receive channel to an Internal Part you can
receive MIDI messages from the external MIDI device and control
the Internal Parts.
These parameters determine how each Part will receive MIDI
messages.
1.
Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.
fig.05-21g
2.
Press CURSOR [ ]/[ ] to select “6. Part
Parameter.”
3.
Press [ENTER] to display the Edit screen.
fig.05-22-1g
fig.05-22-2g
4.
Press CURSOR [ ]/[ ] to move the cursor to
the parameter to be set.
5.
Press [INC]/[DEC] to set the value.
6.
When you have finished making the settings, press
[EDIT], extinguishing its indicator.
You are returned to the Tone screen.
Deleting Files from Memory
(File Delete)
Parameter
Value
File Type
ALL FILES
SETUP
SMF
Setting MIDI Receive Parts
(Part Parameter)
How to Make Settings
RD-700SX_e.book 91 ページ ２００６年３月２３日 木曜日 午後２時５２分