Filter
Top Products
14
Panel Descriptions
fig.rear
1. [POWER ON] Switch
Switch turns the power on/off (p. 23).
2. AC Inlet
Connect the included power cord to this inlet (p. 21).
3. Wave Expansion Board Installation Slot
Remove the cover for installation of optional wave expansion boards
(SRX Series) (p. 15).
4. USB Connector
Connect your computer here to exchange Standard MIDI file and
setup file between the computer and the RD-700SX (p. 104).
5. PEDAL Jacks (DAMPER, FC1, FC2)
Connecting the pedal switch (DP series) provided with the RD-
700SX to the DAMPER jack allows you to use the switch as a damper
pedal.
With a pedal connected to the FC-1 or FC-2 jack, you can then assign
a variety of functions to the pedal (p. 70, p. 84).
6. MIDI Connectors (IN, OUT1, OUT2, THRU)
Used for connecting external MIDI devices and for transmission of
MIDI messages (p. 60, p. 91, p. 101).
7. OUTPUT L (MONO)/R Jacks
Provide output of the audio signals. These are connected to an amp
or other device. For monaural output use the L/MONO jack (p. 21).
8. BALANCED OUT L/R Jacks
Connectors for balanced output of the audio signals. Connect to
mixers and other such gear (p. 21).
9. PHONES Jack
A set of headphones can be connected to this jack (p. 21).
Even when headphones are connected, sound will still be output
from the OUTPUT jacks.
Rear Panel
1
2
3
4 5
6
7 8
9
RD-700SX_e.book 14 ページ ２００６年３月２３日 木曜日 午後２時５２分