Filter
Top Products
121
Chapter 7
Chapter 7 Saving a Sound You Create
Registering Favorite Patches
in the FAVORITE LIST
You can bring together your favorite and most frequently
used Patches in one place by registering them in the
FAVORITE LIST. The FAVORITE LIST gives you immediate
access to your favorite Patches wherever they are stored,
whether in the XV-3080 itself, on Wave Expansion Boards, or
on memory cards. You can register up to 64 Patches in this
list.
If a Patch on a Wave Expansion Board or memory card is
registered in the list and selected, no sound will be produced
for the Patch unless the required Wave Expansion Board or
memory card is inserted.
1. On the PATCH PLAY page, choose the Patch you want
to register.
2. Press VALUE dial.
The FAVORITE LIST page appears.
fig.7-01
3. Turn the VALUE dial or press the [INC] or [DEC]
buttons to select the desired registration number.
* No data is registered at the factory settings.
You can press VOLUME dial to check the sound of the Patch
currently being registered.
4. Hold down [SHIFT] and press [ENTER] to execute the
registration and return to the PATCH PLAY page.
Pressing [SHIFT] switches the display to the Registration
page shown in the figure below.
fig.7-02
To cancel the registration, press the [EXIT] button.
* To cancel the regstration, select the file you want to cancel,
and then hold down [SHIFT] and press [UNDO].
Selecting Patches from the
FAVORITE LIST
1. Press VALUE dial.
The FAVORITE LIST page appears.
2. Turn the VALUE dial or press [INC]/[DEC] to select the
desired Patch.
3. When you press [ENTER], the Patch is selected and you
will be returned to the previous page.
* To cancel the selection, press [EXIT].
Directly registering to the list on the PATCH/
RHYTHM PLAY page
The following display appears when [SHIFT] is pressed
while on the PATCH/RHYTHM PLAY page.
fig.7.02a
If [ENTER] is pressed at this stage, the data is registered
to the lowest-numbered opening on the list.
Although the message “COMPLETED” instantly
appears in the display when the registration is executed,
if the registration cannot be carried out because the list is
full, the message “Favorite List Full” is displayed
instead.