Filter
Top Products
126
Chapter 7 Saving a Sound You Create
a memory card before loading new data.
fig.7-16
1. Press [UTILITY] to make its indicator light.
2. Press [ ] or [ ] to select the UTIL 2 page.
3. Use [ ] or [ ] to make “LOAD” blink, and then
press [ENTER].
4. Turn the VALUE dial or press [INC]/[DEC] to select the
data file you wish to load.
5. Press [ENTER], and the data will be loaded into the XV-
3080.
* If you wish to load only a specific portion of the data file, refer
to “Transmitting To User Memory” (p. 128).
Although Patches, Performances, and Rhythm Sets stored on
memory cards can be called up directly for use by using
Program Change messages or with the panel controls, they
cannot be edited if called up directly using the panel controls
or MIDI Exclusive messages. If you want to edit these, first
send them to the internal memory before editing.
Other Memory Card-Related
Settings (CARD)
The CARD page has the following five functions.
fig.7-17
The following steps describe the basic procedure.
1. Press [UTILITY] to make its indicator light.
2. Press [ ] or [ ] to select the UTIL 2 page.
3. Use [ ] or [ ] to make “CARD” blink, and then
press [ENTER].
4. Select the operation – FORMAT, RENAME, DELETE, or
INFO – that you want to perform.
For additional instructions, please refer to each item’s
description in the manual.
Formatting the Memory Card for the XV-3080
(FORMAT)
Before a newly purchased memory card or a memory card
used with another device can be used in the XV-3080, it must
be formatted on the XV-3080. Formatting initializes a
memory card so that you can save XV-3080 data on it.
* Please be aware that formatting will erase all the data
currently stored on the memory card.
fig.7-18
Press [ENTER], and the Format operation will be executed.
* To cancel the operation, press [EXIT].
Renaming a File (RENAME)
This operation allows you to change the name of a file
already stored on the memory card.
You can assign the file a name of up to eight characters. For
more detailed information, refer to Step 4 of “Transmitting to
a Memory Card (Save)” (p. 125).
* File name extensions cannot be changed.
fig.7-19
Deleting Unwanted Files (DELETE)
Use this operation to delete unwanted files from a memory
card.
fig.7-20
Turn the VALUE dial to select the unwanted file, and then
press [ENTER] to delete it from the card.
* Press [EXIT] to cancel the operation.
Copying Files on One Memory Card to Another
Card (File Copy)
You can take files stored on one memory card and copy them
to another memory card.
* The copy destination memory card must already be formatted.
Always be sure to follow the on-screen instructions when
inserting and removing cards during File Copy. Using other
procedures in this operation may result in damage to the
card.