Filter
Top Products
142
Chapter 9 Examples of Applications Using the XV-3080
2. Use [ ] or [ ] to select the effect that you wish to
turn on/off.
3. Pressing [INC] turns it on and pressing [DEC] turns it
off.
Chorus
Chorus adds depth and spaciousness to the sound.
Reverb
Reverb adds reverberation characteristics of hall or
auditorium ambiences.
Modifying GM Mode Settings
GM mode also offers parameters that you can modify for
each Part. You can modify settings like effects, pan and level
to customize a GM score playback to your preference.
* When GM mode is initialized (p. 145), all these settings will
be lost.
1. Press [GM] to enter GM mode.
2. Press the FUNCTION SELECT buttons to choose the
page group you want to set.
fig.9-03
3. Press [ ] or [ ] to choose the page.
4. If you have selected a parameter display that can be set
independently for each Part, the number of the Part
selected for editing will be shown in the display. To
select a different Part, use [1-8/9-16] and [1/9]–[8/16] to
select a Part.
5. Use [ ] or [ ] to move the cursor to the parameter
you wish to modify.
6. Use the VALUE dial or [INC] / [DEC] to modify the
value.
* If you’ve made a mistake in setting the parameter value or you
don’t like the changes, just press [UNDO] to restore the value
to what it was.
7. If you wish to move to another page group, use the
desired Function Select button to choose a group.
* You can also move to another display group by holding down
[SHIFT] and using [ ] or [ ].
8. Repeat steps 2–8 to complete a GM mode settings.
9. When you finish making settings, press [EXIT] to return
to the GM PLAY page.
* You can also use the Palette display in the same manner when
you edit in Performance mode (p. 109).
■Making Settings for Each Part (PART)
PART PATCH
fig.9-03a
You can select the Patch or Rhythm Set that will be assigned
to each Part.
Type (Part Type) PAT/RHY
Selects the Patch (PAT) or Rhythm Set (RHY) the Part will
play.
Number
Specifies the number of the Patches (1–256) or Rhythm Set
(1–4) that is assigned to each Part.
PART SETTING
fig.9-03b
Make volume, pan, and pitch settings for each Part.
Volume 0–127
Specifies the volume of each Part.
Pan RANDOM/L63–63R
Specifies the stereo location of the sound of each Part. L63 is
hard left, 0 is center, and 63R is hard right.
If you modify the settings of the Volume parameter or Pan
parameter, they will be reflected in the following INFO
group displays.
Coarse (Coarse Tune) -48– +48
Adjusts the pitch of the Part’s sound up or down in semitone
steps over a range of +/-4 octaves.
Fine (Fine Tune) -50–+50
Make fine adjustments in 1-cent steps to the pitch specified in
Coarse Tune.
One cent is 1/100th of a semitone.