Roland XV-3080 Musical Instrument User Manual


 
50
Chapter 2 Using the XV-3080 Effects
22: 2VOICE PITCH SHIFTER
A Pitch Shifter shifts the pitch of the original sound. This 2-
voice pitch shifter has two pitch shifters, and can add two
pitch shifted sounds to the original sound.
fig.2-28
CoarseA (Coarse Pitch A) #1
Adjust the pitch of Pitch Shift A in semitone steps (-2-+1
octaves).
Fine A (Fine Pitch A) #1
Make fine adjustments to the pitch of Pitch Shift A in 2-cent
steps (-100-+100 cents).
One cent is 1/100th of a semitone.
Pan A (Output Pan A)
Adjust the stereo location of the Pitch Shift A sound. L64 is
far left, 0 is center, and 63R is far right.
PreDlyA (Pre Delay Time A)
Adjust the time delay from when the direct sound begins
until the Pitch Shift A sound is heard.
CoarseB (Coarse Pitch B) #2
Adjust the pitch of Pitch Shift B in semitone steps (-2-+1
octaves).
Fine B (Fine Pitch B) #2
Make fine adjustments to the pitch of Pitch Shift B in 2-cent
steps (-100-+100 cents).
One cent is 1/100th of a semitone.
Pan B (Output Pan B)
Adjust the stereo location of the Pitch Shift B sound. L64 is
far left, 0 is center, and 63R is far right.
PreDlyB (Pre Delay Time B)
Adjust the time delay from when the direct sound begins
until the Pitch Shift A sound is heard.
Mode (Pitch Shifter Mode)
Higher settings of this parameter will result in slower
response, but steadier pitch.
Lvl Bal (Level Balance)
Adjust the volume balance between the Pitch Shift A and
Pitch Shift B sounds.
Balance (Effect Balance)
Adjust the volume balance between the direct sound and the
pitch shift sound. With a setting of D100:0W only the direct
sound will be output, and with a setting of D0:100W only the
pitch shift sound will be output.
Level (Output Level)
Adjust the output level.
23: FBK PITCH SHIFTER
(Feedback Pitch Shifter)
This pitch shifter allows the pitch shifted sound to be fed
back into the effect.
fig.2-29
Coarse (Coarse Pitch) #1
Adjust the pitch of the pitch shifted sound in semitone steps
(-2-+1 octaves).
Fine (Fine Pitch) #1
Make fine adjustments to the pitch of the pitch shifted sound
in 2-cent @5 Fbk (Feedback Level) #
Adjust the proportion (%) of the processed sound that is fed
back into the effect. Negative (-) settings will invert the
phase.
Pre Dly (Pre Delay Time)
Adjust the time delay from when the direct sound begins
until the pitch shifted sound is heard.
Mode (Pitch Shifter Mode)
Higher settings of this parameter will result in slower
response, but steadier pitch.
Pan (Output Pan)
Adjust the stereo location of the pitch shifted sound. L64 is
far left, 0 is center, and 63R is far right.
LowGain
Adjust the gain of the low frequency range.
Hi Gain
Adjust the gain of the high frequency range.
L in
R in
L out
R out
2Voice Pitch Shifter
Level Balance A
Balance W
Balance D
Balance W
Balance D
Level Balance B
PanB R
PanA L
PanA R
PanB L
L in
R in
L out
R out
2-Band
EQ
Balance W
Balance W
Balance D
Balance D
2-Band
EQ
Feedback
Pitch Shifter