Roland XV-3080 Musical Instrument User Manual


 
132
Chapter 8 Other Settings and Checking Status
3. Use [ ]/[ ] to select the setting page for Perform Ctrl
Ch.
4. Press [ ]/[ ] to move the cursor to the number
underneath Perform Ctrl Ch.
5. Use the VALUE dial or [INC] / [DEC] to select the
desired Performance Control channel.
6. Press [EXIT] to return to the previous page.
Making Global Settings
Device ID Number Setting
When transmitting or receiving System Exclusive messages,
set this parameter to match the device ID number of the other
MIDI device.
1. Press [SYSTEM] to make its indicator light.
2. Press the [MIDI] function select button (displayed in
gray) to make its button indicator light.
3. Use [ ]/[ ] to select the setting page for Device ID.
fig.8-01
4. Press [ ]/[ ] to move the cursor to the number
underneath Device ID.
5. Use the VALUE dial or [INC] / [DEC] to select the
desired device ID number.
6. Press [EXIT] to return to the previous page.
MIDI Transmit/Receive Switch Settings
(SYSTEM MIDI)
You can set the following parameters by pressing [SYSTEM]
lighting its indicator and then pressing the [MIDI]
function select button.
Rx Program Chg (Receive Program Change
Switch)
This specifies whether Program Change messages will be
received (ON) or not (OFF).
Rx Bank Select (Receive Bank Select Switch)
This specifies whether Bank Select messages will be received
(ON) or not (OFF).
Rx GM On (Receive GM-ON Exclusive Switch)
This specifies whether GM-ON (General MIDI System On)
messages will be received (ON) or not (OFF).
Rx GM2 On (Receive GM2-ON Exclusive
Switch)
This specifies whether GM Level2-ON (General MIDI Level 2
System On) messages will be received (ON) or not (OFF).
Rx GS Reset (Receive GS Reset Exclusive
Switch)
This specifies whether GS Reset messages will be received
(ON) or not (OFF).
Rx Excl (Receive System Exclusive Switch)
This specifies whether System Exclusive messages will be
received (ON) or not (OFF).
Tx Edit (Transmit Edit Data Switch)
When Patch, Performance or Rhythm Set settings are
modified, you can specify whether the modified settings will
be transmitted as System Exclusive data (ON) or not (OFF).
Specifying the Reception Status
for Each Tone
You can enable or disable the response to received MIDI
messages for each Part of a Performance, each Tone of a
Patch, and each Rhythm Tone of a Rhythm Set.
For more information about setting the MIDI response of
Parts in a Performance, check out Establishing a Parts
MIDI Settings (MIDI) (p. 106).
For more about setting the MIDI response of Tones in a
Patch, refer to CTRL Rx MIDI (Tone control receive MIDI)
(p. 99).
For more about setting the MIDI response of Rhythm Tones
in a Rhythm Set, refer to Other Settings (CONTROL)/Rx
MIDI (Receive MIDI) (p. 119).