Filter
Top Products
31
Chapter 2 Using the XV-3080 Effects
Chapter 2
Adjusting Effect Settings in
Rhythm Set Mode
([RHYTHM]-[EFFECTS])
You can apply Multi-Effects, Chorus or Reverb to each of a
Rhythm Set’s Tones. You can control the amount of effect to
be applied to each Tone by adjusting its send level to the
Multi-Effects, Chorus and Reverb.
Setting Procedure:
1. Select the Rhythm Set you wish to work with.
2. Press [EFFECTS] to make its indicator light.
3. Press [ ] / [ ] to select the page you wish to display.
4. Press [ ] / [ ] to move the cursor to the
parameter that you wish to adjust.
5. Turn the VALUE dial or press [INC] / [DEC] to select the
desired value.
* If you make a mistake when setting a parameter’s value, or you
don’t like the change you have made, just press [UNDO] to
restore the parameter to its original value.
6. Repeat Steps 3 to 5 to set the Effect.
7. Press [EXIT] to return to the RHYTHM PLAY page.
A “*” symbol will appear at the left of the Rhythm Set name,
indicating that its settings have been modified.
fig.2-02.e
* If you turn off the power or select another Rhythm Set while
the “*” symbol is displayed, your new Rhythm Set settings
will be lost. If you wish to preserve them, save the modified
Rhythm Set using the Write operation. (p. 122)
Setting the Output for Each Tone
in a Rhythm Set
OUTPUT
These parameters set the output destination and level for the
currently selected Rhythm Set Tone, and allow you to set its
send levels to the Chorus and Reverb.
Output Assign
MFX: This sends the Tone into the Multi-Effects. Its output
destination is determined by to the Multi-Effects output
settings.
OUTPUT A–C: This sends the tone directly to one of the
OUTPUT jack pairs, A–C.
INDIV 1–6: This sends the Tone directly to one of the
INDIVIDUAL 1–6 jacks.
Chorus (Chorus Send Level)
This sets how much of the Tone is sent to the Chorus.
Reverb (Reverb Send Level)
This sets how much of the Tone is sent to the Reverb.
Making Multi-Effects Settings
This page allows you to establish various settings for the
Multi-Effects unit, including its parameters and output-jack
assignment.
RHYTHM MFX TYPE
Use this parameter to select from among the 63 available
Multi-Effects. For a description of these effects, check out
“Parameters for Each Multi-Effect (MFX TYPE)” (p. 36).
RHYTHM MFX PRM (Rhythm MFX
Parameter)
These parameters allow you to customize the selected Multi-
Effect. For a description of the parameters, check out
“Parameters for Each Multi-Effect (MFX TYPE)” (p. 36).
* You cannot select this page when “Type” on the PATCH
MFX TYPE page is set to THROUGH.
RHYTHM MFX CTRL (Rhythm MFX
Control)
Select the Control Source to be used for changing the Multi-
Effects parameters, and set the Sens and parameters to be
changed by that Control Source.
* You cannot select this page when “Type” on the PATCH
MFX TYPE page is set to THROUGH.
Chorus
Reverb
RHYTHM
TONE
Multi-Effects
Rhythm Set
B1
D7