Filter
Top Products
48
Chapter 2 Using the XV-3080 Effects
19: TRIPLE TAP DELAY
The Triple Tap Delay produces three delay sounds; center,
left and right. The center delay time can be specified as a note
value of a specified tempo.
fig.2-24
Delay C (Delay Time Center)
Delay L (Delay Time Left)
Delay R (Delay Time Right)
Adjust the time delay from the direct sound until when the
delay sound is heard. This parameter can be set as a note-
value of a specified tempo. In this case, specify the value of
the desired note.
Fbk (Feedback Level) #
Adjust the proportion (%) of the delay sound that is fed back
into the effect. Negative (-) settings will invert the phase.
Level C (Center Level)
Level L (Left Level)
Level R (Right Level)
Adjust the volume of each delay sound.
HF Damp
Adjust the frequency above which sound fed back to the
effect will be cut. If you do not want to cut the high
frequencies of the feedback, set this parameter to BYPASS.
LowGain
Adjust the gain of the low frequency range.
Hi Gain
Adjust the gain of the high frequency range.
Balance (Effect Balance) #
Adjust the volume balance between the direct sound and the
delay sound. With a setting of D100:0W only the direct sound
will be output, and with a setting of D0:100W only the delay
sound will be output.
Level (Output Level)
Adjust the output level.
20: QUADRUPLE TAP DELAY
The Quadruple Tap Delay has four delays. Each of the Delay
Time parameters can be specified as a note length of the
selected tempo.
fig.2-25
The stereo location of each delay sound is as follows.
fig.2-26
Delay 1 (Delay Time 1)
Delay 2 (Delay Time 2)
Delay 3 (Delay Time 3)
Delay 4 (Delay Time 4)
Adjust the time delay from the direct sound until when each
delay sound is heard. These parameters can be set as a note-
value of a specified tempo. In this case, specify the value of
the desired note.
Level 1
Level 2
Level 3
Level 4
Adjust the volume of each delay sound.
Fbk (Feedback Level) #
Adjust the proportion (%) of the delay sound that is fed back
L in
R in
L out
R out
Left Tap
Right Tap
Triple Tap Delay
2-Band
EQ
2-Band
EQ
Balance W
Balance D
Balance W
Balance D
Feedback
Center Tap
When Step Rate is Set as a Note Value
As the specified tempo, you may use either the Patch
Tempo or the tempo clock of the XV-3080’s system.
L in
R in
L out
R out
Quadruple Tap Delay
Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 2
Delay 3
Delay 4
Feedback
1
23
4
L
R
When Step Rate is Set as a Note Value
As the specified tempo, you may use either the Patch
Tempo or the tempo clock of the XV-3080’s system.